Mechanical and Material Requirements for Steel Nuts
SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”
SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.
QUESTIONS REGARDING THIS DOCUMENT: (724) 772-8512 FAX: (724) 776-0243
TO PLACE A DOCUMENT ORDER: (724) 776-4970 FAX: (724) 776-0790
SAE WEB ADDRESS http://doc.xuehai.net
seding J995 JUN79 (R) Mechanical and Material Requirements for Steel Nuts ...SAE P UBLICATIONS— Available from SAE, 400 Commonwealth Drive, Warrendale,...
SAE PUBLICATION—Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001. SAE J995—Mechanical and Material Requirements for Steel Nuts 2.2....
SAE PUBLICATION—Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001. SAE J995—Mechanical and Material Requirements for Steel Nuts 2.2....
SAE J429—Mechanical and Material Requirements for Externally Threaded Fasteners SAE J995—Mechanical and Material Requirements for Steel Nuts 3. Designation—...
SAE SAE J995 ASTM ASTM F1470 2 1 1 SAE Sems: U-BOLTS 1 (collared) ...2 in. 5 LA Mechanical and Material Requirements for Externally Thread ...
J995 JUL1999 Mechanical and Material Requirements for Steel Nuts SAE J1053 AUG1996 Steel Stamped Nuts of One Pitch Thread Design—Inch Series SAE J1053M ...
SAE J933 AUG2005 Mechanical and Quality Requirements for Tapping Screws SAE J995 JUL1999 Mechanical and Material Requirements for Steel Nuts SAE J1053 AUG...
15096-0001 STANDARD R) Mechanical and Material Requirements for Steel Nuts ...表 A1—小品种螺母的保证载荷,(1) LBF (仅仅UNC螺纹) SAE J995 Revised JUL...
SAE J1199—Mechanical and Material Requirements for Metric Externally Threaded ...ASTM A 563M—Specification for Carbon and Alloy Steel Nuts (Metric) ASTM ...
and Passenger Head Position.pdf SAEJ1053:1996 STEEL STAMPED NUTS OF ONE ...(R) MECHANICAL AND MATERIAL REQUIREMENTS FOR WHEEL BOLTS.pdf SAEJ1102M:2001...
3.1.2 Mechanical Requirements. Not applicable. 3.1...In case of nuts, determine at midpoint of ...SAE/USCAR-5 and tested for de-embrittlement per...
我要评论