NRLM223M160V20X30F中文资料

元器件交易网http://doc.xuehai.net

Large Can Aluminum Electrolytic Capacitors

FEATURES

NEW SIZES FOR LOW PROFILE AND HIGH DENSITY DESIGN OPTIONS EXPANDED CV VALUE RANGE

RoHS HIGH RIPPLE CURRENT

LONG LIFECompliant

includes all homogeneous materials

CAN-TOP SAFETY VENT

DESIGNED AS INPUT FILTER OF SMPS*See Part Number System for Details STANDARD 10mm (.400") SNAP-IN SPACINGSPECIFICATIONS

Operating Temperature Range

Rated Voltage RangeRated Capacitance RangeCapacitance ToleranceMax. Leakage Current (µA)After 5 minutes (20°C)

W.V. (Vdc)Max. Tan δ

at 120Hz/20°CTan δ max.

W.V. (Vdc)S.V. (Vdc)

Surge Voltage

W.V. (Vdc)S.V. (Vdc)Frequency (Hz)Ripple Current

Correction FactorsMultiplier at 85°C

Temperature (°C)

Low Temperature

Capacitance Change

Stability (10 to 250Vdc)

Impedance RatioCapacitance Change

Load Life Test

Tan δ

2,000 hours at +85°C

Leakage CurrentCapacitance ChangeShelf Life Test

1,000 hours at +85°CTan δ

(no load)Leakage CurrentSurge Voltage TestCapacitance ChangePer JIS-C-5141 (table #6, #4)Tan δSurge voltage applied: 30 seconds

Leakage Current"On" and 5.5 minutes no voltage "Off"

Capacitance ChangeSoldering Effect

Refer to Tan δ

MIL-STD-202F Method 210ALeakage Current

-40 ~ +85°C

16 ~ 250Vdc180 ~ 68,000µF

±20% (M)µF)V

160.50*1620180220500.750-5%1.5

NRLM Series

-25 ~ +85°C350 ~ 450Vdc56 ~ 680µF

2535506380100160~4500.40*0.350.300.250.200.200.15253550638010016032446379100125200200250350400450--250300400450500--601001205001K10K ~ 50K-0.800.951.001.051.081.15--25-40------15%-30%-----39-----Within ±20% of initial measured valueLess than 200% of speci ed maximum value

Less than speci ed maximum valueWithin ±20% of initial measured valueLess than 200% of speci ed maximum value

Less than speci ed maximum valueWithin ±20% of initial measured valueLess than 200% of speci ed maximum value

Less than speci ed maximum valueWithin ±10% of initial measured value

Less than speci ed maximum valueLess than speci ed maximum value

(* 47,000µF add 0.14, 68,000µF add 0.35.)Sleeve Color: Dark

Blue

Can Top Safety Vent

Insulation Sleeve and Minus Polarity Marking

0.8

D+1Max.

Recommended PC Board Mounting Holes:

= 2 ± 0.1

10 ± .1

D ± 0.5

L ± 2

6.3 ± 1Chassis

Notice for Mounting

The space from the top of the can shall be more than (3mm) from chassis or other construction materials so that safety vent has room to expand in case of emer gen cy.

(4.0mm Leads Available As Option)

MAXIMUM EX PAN SION

FOR SAFETY VENT3.0mm

PC Board

PRECAUTIONS

®

Please review the notes on correct use, safety and precautions found on pages T10 & T11

of NIC’s Electrolytic Capacitor catalog. Also found at http://doc.xuehai.net/precautions

If in doubt or uncertainty, please review your speci c application - process details with

NIC’s technical support personnel: tpmg@http://doc.xuehai.net

144

NIC COMPONENTS CORP. http://doc.xuehai.net http://doc.xuehai.net www.RFpassives.

com http://doc.xuehai.net

第1页下一页