1.1
General
The 3M 5815 Series Modular Splicing System is afully shielded 600 Amp separable connector systemwhich meets the requirements of ANSI/IEEEStandard 386 – "Separable Insulated ConnectorSystems." These modular kits are available forsplicing, dead-ending and connecting to deadfrontapparatus such as transformers, switches and
switchgear equipped with 600 Amp bushings. Thesystem has the capability for future modification bysimply adding or removing modular components.By combining kits, the system can accommodate 3-way, 4-way, parallel feed, etc. connections in varioustap splicing configurations.
The modular kits are designed for use on 5, 8, 15 and25 kVrated industrial shielded power cables. Kitinstructions describe installations for tape shield,wire shield, UniShield® and jacketed concentricneutral types of solid dielectric cables with extrudedsemi-conductive insulation shields. Acapacitive testpoint on the insulating plug provides a safe means oftesting the circuit without disturbing the boltedconnection. The completed installation is fully
shielded to provide a complete deadfront connectionwhich is suitable for operation in submerged ordirect burial locations. Table 1
Base Kit Contents
5815-S (2-way splice)
1.2
Kit Contents
Acomplete modular splice installation requires oneor more splicing kits (base kits) along with anadapter kit for each cable being connected. Eachbase kit contains the following materials, includingsilicone lubricant.
3M 冷缩电缆终端接头 ● 冷缩式单芯橡胶绝缘电缆终端选型 表 户内 电压 等级 型号 户外 导体截面 (MM2) 主绝缘外径 (MM) 型号 导体截面 (MM2) 主绝缘外径 ...
接头本体 6.PVC 管 7.外半导电层 8.半导电膨胀带 9.铜屏蔽带 10.金属屏蔽 11.膨胀带 12.热缩管 13.电缆护套 www.3m.com.cn 兰州兴丰源电气有限公司 ...
电缆接头流程及技术要求_信息与通信_工程科技_专业资料。电缆接头工艺中铁...将带有 1.37mm×7×3M 地线的铜套(需另购)拧在地线柱上,裸露处用适宜的...
3M电缆头制作_电力/水利_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 3M电缆头制作_电力/水利_工程科技_专业资料。今日推荐 ...
3m20kV单芯电缆冷缩式中间接头QS2000-G-K安装说明_材料科学_工程科技_专业资料...20kV 单芯电缆冷缩式中间接头 电缆冷缩式中间接头 冷缩式中间接头(QS2000-G-K...
严禁在雾中或雨中施工 3,设计时应该考虑电缆长度要求,尽量避免使用中间接头,必须使用中间接头 的,应在电缆接头两侧及相邻电缆 2~3m 长的区段内施加防火涂料或防火...
电缆中间接头_建筑/土木_工程科技_专业资料。录 A:接地电阻的测量方法 A.1 接地...2 接地电阻测试仪设置的技术要求 (1)接地电阻测试仪应放置在离测试点 1~3m...
50~100m 处、电缆接头处、转弯处、进入建筑 物等处, 应设置明显的方位标志或标 桩 在电力电缆接头两侧及相邻电缆 2~ 3m 长的区段施加防火涂料或防火包 带...
2)安装3M冷缩中间接头 ? 压接接管前,套入冷缩中间接头 压接接管前, ? 将冷缩管套入电缆开剥的长端 ? 将铜网套套入电缆开剥的短端 ? 收缩冷缩管前,作...
我要评论