EL7104CS中文资料

元器件交易网doc.xuehai.net

®

EL7104

Data Sheet

May 6, 2005

FN7113.1

High Speed, Single Channel, Power MOSFET Driver

The EL7104 is a matched driver IC that improves the

operation of the industry-standard TC-4420/29 clock drivers. The Elantec version is a very high speed driver capable of delivering peak currents of 1A into highly capacitive loads. The high speed performance is achieved by means of a proprietary “Turbo-Driver” circuit that speeds up input stages by tapping the wider voltage swing at the output. Improved speed and drive capability are enhanced by matched rise and fall delay times. These matched delays maintain the integrity of input-to-output pulse-widths to reduce timing errors and clock skew problems. This improved performance is accompanied by a 10-fold reduction in supply currents over bipolar drivers, yet without the delay time problems commonly associated with CMOS drivers.

The EL7104 is available in 8-pin SO and 8-pin PDIP

packages and is specified for operation over the full -40°C to +85°C temperature range.

Features

Industry-standard driver replacement Improved response times Matched rise and fall times Reduced clock skew Low output impedance Low input capacitance High noise immunity Improved clocking rate Low supply current Wide operating range Separate drain connections Pb-Free available (RoHS compliant)

Applications

Clock/line drivers CCD drivers

Ordering Information

PARTNUMBEREL7104CNEL7104CSEL7104CS-T7EL7104CS-T13EL7104CSZ(See Note)EL7104CSZ-T7(See Note)EL7104CSZ-T13 (See Note)

PACKAGE8-Pin PDIP8-Pin SO8-Pin SO8-Pin SO8-Pin SO(Pb-free)8-Pin SO(Pb-free)8-Pin SO(Pb-free)

TAPE & REEL

--7”13”-7”13”

PKG. DWG. #MDP0031MDP0027MDP0027MDP0027MDP0027MDP0027MDP0027

Ultrasound transducer drivers Power MOSFET drivers Switch mode power supplies Resonant charging Cascoded drivers

Pinout

EL7104

(8-PIN SO, PDIP)TOP VIEW

V+1IN2NC3GND4

8V+7P_OUT6N_OUT5GND

NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.

第1页下一页