TFCJJ6ST105BW中文资料

C&K TF Series

Miniature Snap-acting Switches

Features/Benefits

Broad range of operating forces Ratings up to 25 AMPS

Wide variety of actuator styles Quick connect terminations

Typical Applications Motor controls Thermostatics Portable tools

Specifications

CONTACT RATING: From low level* to 25 AMPS @ 277 V AC.ELECTRICAL LIFE: 300,000 cycles at 10 AMPS @ 250 V AC,

consult Customer Service Center for typical life of higherrated switches.

INSULATION RESISTANCE: 1,000 M ohm min.

DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level.

OPERATING TEMPERATURE: –40ºF to 185ºF (–40ºC to 85ºC).OPERATING FORCE: From 15 to 400 grams at actuator

button available.

MOUNTING: Torque screws 2-5 in/lbs.

* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @20 V AC or DC max. Standard electrical life per UL 1054, rated for 6,000 operations.

Materials

SWITCH HOUSING: Thermoplastic (UL 94V-0).ACTUATOR BUTTON: Thermoplastic (UL 94V-0).SPRING: Copper alloy.PIVOT: Brass alloy.

MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less.

Fine silver for ratings greater than 1 AMP up to 15 AMPS.Precious metal alloy for ratings greater than 15 AMPS.STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less.

Fine silver for ratings greater than 1 AMP.

TERMINALS: Brass alloy for ratings up to 10 AMPS.

Copper alloy for ratings greater than 10 AMPS.

NOTE: For the latest information regarding RoHS compliance, please go to:doc.xuehai.net.

NOTE:Specifications and materials listed above are switches with standard options.For information on specific and custom switches, consult Customer Service Center.

Snap-acting

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown anddescribed on pages K-6 through K-10. For additional options not shown in catalog, consult Customer Service Center.

Series

TFSP,Mom.

Operating ForceCJ5.29 oz./150 gramsCC.53 oz./15 gramsCD.88 oz./25 gramsCF1.76 oz./50 gramsCG2.65 oz./75 grams

EC7.94 oz./225 gramsEE14.11 oz./400 grams

Electrical Rating

J615 A,277 V AC; 1/2 HP,125,250 V AC;

5 A,125 V AC “L”,0.5 A,125 V DC;0.25 A,250 V DC

F51 A,125 V AC; 1 A,3O V DC

H85 A,277 V AC; 1/10 HP,125,250 V ACJ321 A,277 V AC; 1 HP,125 V AC; 2 HP,

250 V AC; 5 A,125 V AC “L”

K611 A,277 V AC; 1/3 HP,125,250 V AC;

0.5 A,125 V DC; 0.25 A,250 V DCL125 A,277 V AC; 1.5 HP,125 V AC; 2 HP,

250 V AC; 5 A,125 V AC “L”L320 A,250 V AC; 1 HP,125 V AC;

2 HP 250 V AC

V11 A,125 V AC; 1 A,3O V DC (UL/CSA)

V25 A,277 V AC; 1/10 HP,125,250 V AC (UL/CSA);

5(2) A,250 V AC (VDE)

V311 A,277 V AC; 1/3 HP,125,250 V AC;

0.5 A,125 V DC; 0.25 A,250 V DC (UL/CSA);10(3) A,25O V AC (VDE)

V421 A,277 V AC; 1 HP,125 V AC; 2 HP,25O V AC;

5 A,125 V AC “L”; 16(3) A,25O V AC (VDE)

Mounting StyleSStandardVMetric

Actuator

P00Pin plunger

A10.81" lever roller,high forceA151.34" lever roller,high forceA201.05”lever roller,low forceA251.56" lever roller,low forceT10.84" lever,high force

T131.34" simulated roller,high force T141.29" simulated roller,high forceT151.40" lever,high forceT162.34" lever,high forceT182.75" lever,high forceT201.10" lever,low force

T231.56" simulated roller,low forceT241.50”simulated roller,low forceT251.62" lever,low forceT262.57" lever,low forceT282.97”lever,low forceWP0Wide pin plunger

CircuitryCSPDTWSPST N.C.YSPST N.O.

Terminations

40.187"quick connect4A.250" quick connect

5A.250" offset quick connect5B.187" offset quick connect

Dimensions are shown:Inch(mm)

Specifications and dimensions subject to change

K–5

doc.xuehai.net

第1页下一页